1、 The following is an introduction to the characteristics of new energy vehicle PCB: 1. PCB board of new energy vehicle is applicable to high temperature A major feature of new energy vehicle PCB is its high temperature resistance. The low density of these automobile PCB boards helps them dissipate heat. 2. PCB board of new energy vehicle is applicable to various environments

New energy vehicle PCB manufacturers need to carry out PCB design proofing and check whether it works well during production and manufacturing. This purpose is to help produce high-quality automobile PCB that meets the industry requirements. The following are the steps of new energy vehicle PCB proofing.

The combination of single-sided PCB and double-sided PCB can form a complex PCB circuit board. PCB multilayer boards with more layers have larger areas for installing electronic components and wiring.

Adjacent conductor spacing must meet electrical safety requirements, and spacing should be as wide as possible for ease of operation and production. The minimum spacing should be at least suitable for the voltage to withstand. When the wiring density is low, the spacing of the signal lines can be appropriately increased. The signal lines with high and low levels should be as short as possible and the spacing should be increased. Under normal circumstances Set the trace spacing to 8 mils. The distance from the edge of the pad to the edge of the board is greater than 1mm, which avoids pad defects during processing. When the traces connected to the pads are thinner, the connection between the pads and the traces is designed to be water droplets. This has the advantage that the pads are not easy to peel, but the traces are not easily disconnected from the pads.

PCB board design needs to provide information: 1. Schematic: A complete electronic document format that can produce a correct net list 2. Mechanical size: provide the specific position and direction identification of the positioning device, and the identification of the specific height limit position area;

With a focus on this common pursuit, Dialog offers a new Configurable Mixed-signal IC, GreenPAK, a cost-effective, non-volatile memory configuration device that developers can use to integrate system functions. Minimize the number of PCB components, board area and power consumption.

The Trump administration of the United States has targeted ZTE and Huawei in China, and has separately implemented technical export controls and investigations. It has been interpreted as limiting the development of China's 5G communications, which is ahead of its time. It is obvious that Taiwanese PCB industry is actively investing in 5G applications. In the days of the Japanese business, Dongfang and Hitachi Chemicals came to Taiwan to take a step.

In recent years, the global new energy vehicle market has developed rapidly. According to statistics, in 2013, the global sales of new energy passenger vehicles was only 147,000. From 2014 to 2016, the global sales of new energy vehicles were 350,000, 550,000, and 770,000 units, with a compound annual growth rate of 48.3%.